Carton laser marking and strapping machine proposal
1. Overall 3D drawing of the equipment
2. Overall machine operating sequence:
1. Workers place stacks of products into the front-end separating mechanism; separated products flow to the next station, and when a product is detected in position a pneumatic cylinder stops it and the two front-end laser markers mark the code at the specified position on the carton.
2. After the front-end marking is complete, the stopping cylinder releases and the product continues to the next station for marking; when the product is detected in position the cylinder stops it again, and the two rear laser markers mark the code at the specified position on the carton.
3. After the rear marking is complete, the stopping cylinder releases and the product continues to the next station for turning over; once the product reaches the specified position in the turning mechanism, the mechanism turns the product over to the other side.
4. After the product is turned over, it continues to the next station for positioning and marking; when the product is detected in position a cylinder stops it, and the two front-end laser markers mark the code at the specified position on the carton.
5. Once coding at the front station is complete, the stop cylinder releases and the product flows on to the next station for coding. When the product is detected in position, the cylinder stops it, and the two laser coders at the rear apply the codes to the designated positions on the carton
6. Once coding on both sides is complete, the product flows on to the next station for counting and folding. When the product is detected in position, the cylinder stops it at the limit; once the required count is reached, the cylinder retracts and the folded products flow on to the next station
7. The folded products flow into the strapping machine, which straps them; after both straps are applied, the products continue to the next station. The above is the complete work flow, and the line repeats this cycle.
☆ Applicable product dimensions: custom-built to customer requirements ☆ Production efficiency: 5-6 pieces/min (one piece = 5 units) ☆ Labeling accuracy: ±3 mm–5 mm ☆ Power supply: 220V/50 Hz ☆ Machine weight: approx. 600 kg ☆ Compressed air pressure 0.6 MPa–0.8 MPa, clean and dry compressed air ☆ Compressed air flow instantaneous ≥100 L/min
☆ Production environment: workshop temperature 10℃–40 ℃, relative humidity 10%–60% (no condensation)
“Professional focus, customer first”isWanzhiour business goal,“Trusted pricingand honest win-win cooperation”isWanzhiis our operating philosophy；
We have 11 years ofautomaticlabelingand packaging equipmentmanufacturing and service experience. Our main products:Labeling machine、custom non-standard equipment, carton sealers, case erectors, automatic packaging lines, and other automation equipment，Over the years we have, forcompanies across manyindustries, designed dedicatedcustom automationintegrated solutionprojects;
Exceeding expectations andearning every customer’s recognitionand satisfactionis the shared goal of everyone at Wanzhi,24-hour after-sales hotline,48-hour commitment to reach the customer site,and we have alwayswith industry-leading technology and fast response, for ourcustomersproviding professional, high-quality service.。
The above content comes from Dongguan Wanzhi Automation Technology Co., Ltd. For more custom non-standard equipment operation instructions and feature details, visitLabeling machine manufacturerthe Wanzhi Automation website at www.wanzhiauto.com. Thank you for reading!