In the production of long workpieces such as cable trunking, long aluminum profiles, plastic strips and paper tube cores, applying double-sided tape to the side and flat faces is a key step in assembly, lamination and fixing. Traditional production relies mostly on manual taping, which brings problems such as tape offset, inconsistent lengths, wrinkles and bubbles, and ragged tape cuts. Finished products look uneven, and there is a real risk of poor adhesion and later debonding. Manual taping is also slow and labor-intensive, seriously short of capacity for large orders, and differences in operator skill make the product yield hard to standardize — common pain points across long-profile taping.
Responding to the firm demand for taping on tubes, trunking and long profiles and to these industry weaknesses, the Wanzhi Automation WZ-860 tube and pipe tape applicator (cable trunking tape applicator) targets long-workpiece taping directly. It was developed for long tubes, PVC trunking, aluminum profiles, rubber strips, paper tubes and other long materials, and integrates automatic feeding, automatic liner peeling, accurate tape application and fixed-length tape cutting in one operation. With high accuracy, wide adaptability and high stability, it solves the problems of poor accuracy, low efficiency and high waste in manual taping and gives the hardware, home improvement and building materials, electronic accessories and packaging profile industries a standardized, automated taping solution for volume production.
1. Precise positioning: built for long tubes and trunking taping
The machine uses a lightweight industrial frame, compact and space-saving, and works both inline with a workshop production line and standalone. With a mature drive system and intelligent control system, it is simple and easy to operate: no specialist technician is needed for setup, and ordinary staff can run it after brief training. It suits small and medium processing plants running volume production and large companies needing standardized production alike — essential equipment for automating long-profile taping.
2. Core advantages: four highlights that rebuild long-profile taping
1. High-accuracy fixed-length taping with controlled error and consistent output
A precise positioning system holds taping accuracy to ±1mm and supports setting the tape length, tape position and cut length as required. This eliminates the length deviation, misalignment and skew of manual taping; application is tight and consistent, fully meeting the quality standards for batch shipment and the quality requirements of high-end orders.
2. Fully automated, integrated operation that frees up labor capacity
Automatic tape feeding, automatic liner peeling, automatic roller application and automatic fixed-length cutting are integrated into one fully automated flow, with no manual peeling, alignment or cutting at any point. Running speed is steady and adjustable, and can be set freely to suit the process and capacity requirement; efficiency is more than 3 times that of purely manual taping, completely removing the manual capacity bottleneck.
3. Strong material adaptability, wide versatility and compatibility
The WZ-860 tube and pipe tape applicator handles most common adhesive materials on the market, reliably applying double-sided tape, 3M tape, foam tape, EVA tape, high-temperature tape, single-sided sealing tape and more, with tape widths covering standard production sizes. It also works with long workpieces in plastics, aluminum, paper, rubber and hardware, covering trunking, tubes, rubber strips, profiles, paper tubes and the full range of long products. One machine meets a workshop’s taping needs across many categories, giving high equipment utilization.
4. Low waste and high stability: lower costs and better quality together
A precise tape feed and control structure prevents tape from being pulled, shifted or wasted, greatly reducing raw material loss. The constant-speed roller design applies even pressure, automatically expels air and leaves the taped surface flat and snug with no bubbles, wrinkles or lifted edges; the bond is firm and resists debonding, greatly improving the product yield rate. Core components are durable and hard-wearing, with a low failure rate and simple maintenance, giving strong long-term production stability and effectively reducing later repair and production waste costs.
3. Core technical specifications
Wanzhi WZ-860 cable trunking and tube tape applicator specifications:
• Tape application accuracy: ±1mm (stable accuracy in volume production)
• Running speed: 20-35m/min, steplessly adjustable
• Applicable tapes: double-sided tape, 3M tape, foam tape, EVA tape, high-temperature tape, single-sided sealing tape, etc.
• Applicable workpieces: PVC trunking, plastic tubes, long aluminum profiles, rubber strips, paper tubes and long hardware profiles
• Operating voltage: 220V/50HZ, matching standard workshop power
• Power: 550W, low consumption and energy-saving
• Air supply: 0.6-0.8Mpa (standard factory air supply)
4. A wide range of applications
Thanks to its dedicated design, high accuracy and high efficiency, the WZ-860 tube and pipe tape applicator suits long-workpiece taping across many industries with strong versatility:
1. Electrical and building materials: automatic taping of PVC cable trunking, flame-retardant conduits and wiring profiles for trunking fixing and sealing; the tape is applied neatly and firmly, suiting volume production of engineering building materials.
2. Hardware and profiles: foam tape application on long aluminum profiles, hardware trim strips and decorative profiles, keeping the profile appearance clean and meeting the accuracy required for home decoration and commercial fitting-out.
3. Packaging paper tubes: taping of paper tubes, cores and long paper-based materials, with precise fixed-length cutting for paper tube sealing and lamination.
4. Electronic accessories: taping of long rubber strips, insulation strips and sealing strips; high-accuracy application does not damage the workpiece and meets production standards.
5. Value in volume production
In long tube and trunking taping, manual operation always brings four problems: unstable quality, limited capacity, high labor cost and heavy material waste. The Wanzhi Automation WZ-860 tube and pipe tape applicator (cable trunking tape applicator) targets these pain points directly, replacing manual taping with dedicated equipment to make the step standardized, automated and precise. It helps companies handle large orders with ease and is core automation equipment for cutting costs, raising efficiency and upgrading capacity.
Developed for long tubes, trunking, aluminum profiles, paper tubes and other long workpieces, it solves the poor accuracy, low efficiency and high waste of manual taping and integrates automatic feeding, liner peeling, tape application and tape cutting in one operation.
Core advantages
1. High accuracy: taping accuracy ±1mm, precise fixed lengths, with no offset, skew, bubbles or wrinkles.
2. High efficiency: a fully automated flow that is more than 3 times as efficient as manual work, with stepless speed adjustment.
3. Wide adaptability: compatible with many tapes and with long workpieces in plastic, aluminum, paper and hardware.
4. Low waste: precise tape feeding, firm adhesion, high yield and low operating costs.
Key specifications
・ Tape application accuracy: ±1mm
・ Running speed: 20-35m/min
・ Power supply: 220V/50Hz, 550W
・ Air supply: 0.6-0.8Mpa
Applications
Volume taping of long workpieces in electrical and building materials, hardware and profiles, packaging paper tubes and electronic accessories.
Core value
Replaces manual work with standardized, automated production, cutting costs, raising efficiency and improving capacity and yield.
Dongguan Wanzhi Automation has specialized in R&D and production of tape application and labeling equipment for many years, with its own production workshop and professional technical team, a full range of models and support for customization on request; the equipment is built from solid materials, runs stably and lasts. From solution design and on-site commissioning to after-sales maintenance, we provide one-stop, end-to-end support. We bring professional automation to weighing instrument manufacturing, helping manufacturers cut costs, raise efficiency, control quality strictly and seize market opportunities. Customers in many parts of the country have verified the equipment in production — for reliable tape application equipment, choose Wanzhi. Manufacturers are welcome to visit, run samples and work with us to seize new smart manufacturing opportunities!