Basic troubleshooting methods for card labeling machines:
When an automatic card labeling machine fails, how should we deal with it? Here is an introduction:
Labeling machine faults are often caused by improper manual operation or aging parts. They can be summarized as follows:
1. Inaccurate labeling;
Inaccurate labeling can be summarized in two aspects. First, the fixed labeling position deviates from the actual labeling position: the screws at the fixed position have loosened and shifted, or the labels used do not meet the labeling machine’s requirements. Second, the labeling head is out of position, so it cannot engage accurately during labeling.
2. Continuous labeling or no labeling at all;
The causes are as follows: incorrect parameter settings, where two labeling cycles are set within the same cycle, causing duplicate labels. When no label is applied, the cause is insufficient lubricant in the labeling head, which increases friction during operation and jams the labeling action, or aging parts; aging parts should be replaced immediately to avoid a chain of related failures.
3. The labeling machine stops suddenly during operation, or stops intermittently;
This problem is more serious. Immediately check for incorrect parameters, a short circuit in the power cord, or a problem with internal components. If it is a parameter error, adjust according to the user manual; in the latter two cases, contact after-sales service urgently.
For small problems with dedicated labeling equipment, solving them yourself — and being familiar with how the machine works and mastering basic inspection and repair skills — effectively saves repair time.
To learn more about our equipment, visit the [Wanzhi] official website at http://www.wanzhiauto.com or call our free service hotline at 400-8860-822 to speak with our customer service team.