Product details

WZ-870 automatic foam tape applicator

1. Basic application:

The automatic foam tape applicator applies multiple foam strips to the plastic trays used in the electronics industry. It is equipped with reinforced high-precision dual heads and uses a stop-and-hold method for precise product positioning and labeling, providing better product protection and shock absorption.

II. Core working principle:

When the sensor detects a product passing, it sends a signal to the labeling control system; the stopping mechanism extends to position the product, and the control system drives the motor to feed the label and apply it at the positions to be labeled, completing the application of one label.

III. Operating process:

Automatic start ―> conveyor start ―> place products on the conveyor (or connect to the upstream production line) ―> product sensor detects the product ―> stop the product ―> pulling motor starts and dispenses the label ―> foam strip is applied to the product ―> labeling complete ―> stopping positioning cylinder retracts ―> conveyor start ―> stop the product ―> head 2# applies foam ―> automatic collection ―> push the stacked products out to the buffer conveyor.

IV. Technical specifications: (custom-built available).

◆ Labeling accuracy: ±1 mm (excluding product and label tolerances)

◆ Labeling speed: 15–25 pieces/min (related to product and label sizes)

◆ Applicable product size: length: 300mm～600mm, width: 100mm～300mm, height (thickness): 15mm～45mm

◆ Applicable label size: length: 20mm～150mm; width (liner width): 100mm～200mm

◆ Applicable roll dimensions: outer diameter 500 mm, inner diameter 76 mm

◆ Machine dimensions: approx. 4600 mm×5300 mm×1650 mm (L×W×H);

◆ Power supply: 220V/50 Hz;

◆ Machine power: approx. 2200 W